Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wismec Sinuous P80 80W TC Box Mod (mod only)
Author Message
Raymcconn Offline
Senior Member
****

Posts: 251
Likes Given: 356
Likes Received: 275 in 152 posts
Joined: Jan 2017
Reputation: 12
Post: #1
Wismec Sinuous P80 80W TC Box Mod (mod only)
Let’s get this out of the way. This Sinuous P80 was sent to me from Efun.top specifically for the purposes of this review. This will not in any way, cause me to give this mod a favorable review or influence my opinion in any way.
Quote:WISMEC Sinuous P80 80W TC Box Mod Features:


  1. Single High-Amp 18650 Batteries – Not Included
  2. Wattage Output Range: 1-80
  3. Minimum Atomizer Resistance: 0.05ohm
  4. Temperature Control Range: 200-600F
  5. Ni200, Titanium, and 316 Stainless Steel Compatibility
  6. TCR Adjustments
  7. 2 A quick charge
  8. Stealth Firing Bar – Squeeze to Fire
  9. LED Battery Light Indicator
  10. Intuitive 0.96 Inch OLED Display
  11. Slide-to-Open Hinged Battery Door
  12. Dual Circuit Protection
  13. Reverse Polarity Protection
  14. MicroUSB Port – Firmware Upgrades
  15. Centered 510 Connection – Fits up to 25mm


How it is packaged:
The box has two tiers. Top tier has the mod and the warning card, under that you will find your usb cable and the user manual. If you bought the kit you will also find your Elabo Mini tank also.


                                         [Image: dzsjnsg.jpg?6] 
                                                                                  
                                        [Image: hDGhNFw.jpg?2]


Quote:Description:


 The Wismec Sinuous P80 features a centered 510 pin, a side OLED screen, hidden firing bar and the usb port for charging or firmware upgrades.  The battery compartment at the bottom is a pull to open lid. Some other features it has are customizable LED light on each side. You have a choice of red, green or yellow.  It also has a pre heat function, and full temperature control with TCR adjustments. It also has a 2 A quick charge.  It has a power range of 1 to 80 watts, and tanks up to 25mm will fit with out over hang.


The Sinuous P80 comes in red, silver, black, blue and bronze.




Operation:


After installing the battery you press on the firing bar five times continually to turn on or off the mod. By pressing the fire button three times continually you enter the mode option menu. There you chose the operating mode of your choice. Including VW, Bypass and all your TC modes including TCR-M1.  


If you press the firing bar and the right regulatory button at the same time you enter the menu where you chose your LED light color or turn it off, turn on or off you logo option and adjust or turn off your pre heat. Pressing the fire bar and left regulatory at the same time turns on or off your stealth mode. Pressing both regulatory buttons locks or unlocks the keys.




A week of usage:


I will be honest. When I first saw the mod I thought there is no way that I would ever use something like this. I do not like huge mods but I thought this would be too small for my hands. I was surprised how it fit in my hand and was comfortable. My big fingers could press the regulatory buttons without a problem. Like any single battery mod I did have to carry a extra battery with me.




Now let’s look at how I used it.


I used my 22mm Tsunami with a duel 10 wrap 316L, 0.24 ohms @ 62W. It vaped fine but it ran through the battery pretty quick how I vape. I went through 2 new HG2’s at work. This is no different than any other single battery mod. So no surprises here.


                                    [Image: fzEO9MP.jpg?1]






 I then switched out to a tank running a 0.5 ohm coil @ 42 W. I had a battery last me all day at work switching to the second battery as I was leaving. I should add I turned off the LED lights and logo option. So again no surprises.


                                   [Image: 5FkbJC6.jpg?1]


Temp Control is not that great; the pre heat function does work. The firmware upgrade available is supposed to improve the TC. I haven’t noticed that much of a difference after installing it. You can find the firmware here.  http://www.wismec.com/software/wismec-tc-software-for-upgrading-sinuous-p80/


I also used this on bypass mode, not battery friendly but I did enjoy it on this mod.




Overall I like the Sinuous P80. The centered 510, firing bar and oversized OLED display (0.96”) made it easy to like. Another big plus for me is you have the option to run Artic Fox firmware on it if you choose to do so. I definitely have situations where a mod this size, light weight and pocket friendly will come in handy.  A few things I did not like was all my tanks didn’t sit flush on the mod, there was a mm space in between. The tanks were on tight and vaped fine. Also you can’t see the screen out side in the sun and can’t adjust how long the display is on for. It seems to be on for longer than it needs to be. None of the three is a deal breaker but I wanted to bring them up. I think I found my new mod for golf course !!!!








You can get the mod here:  https://www.efun.top/wismec-sinuous-p80-80w-tc-box-mod.html


You can get the kit here: https://www.efun.top/wismec-sinuous-p80-with-elabo-mini-tc-full-kit.html


Please let me know what you think. This being the first time doing this I am looking any and all feedback.
12-09-2017 03:09 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like Raymcconn's post:
52anddone (11-12-2017), ecignut (09-12-2017)
TinWhisker Online
The Salty Dog
*******
Senior Staff

Posts: 13,385
Likes Given: 17,717
Likes Received: 21,271 in 9,761 posts
Joined: Aug 2015
Reputation: 212
Post: #2
RE: Wismec Sinuous P80 80W TC Box Mod (mod only)
No fair!!! Efun never sent me anything! I want to try that new Laisimo!

Glad you like the thing, but I am still stuck on that name, Wismec...
12-09-2017 03:12 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like TinWhisker's post:
ecignut (09-12-2017), Raymcconn (09-12-2017)
Raymcconn Offline
Senior Member
****

Posts: 251
Likes Given: 356
Likes Received: 275 in 152 posts
Joined: Jan 2017
Reputation: 12
Post: #3
RE: Wismec Sinuous P80 80W TC Box Mod (mod only)
Yea, I know that is going to get people.
12-09-2017 03:16 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like Raymcconn's post:
ecignut (09-12-2017), TinWhisker (09-12-2017)
ecignut Online
Squonk and Toodle Club Member
*******
Senior Staff

Posts: 11,116
Likes Given: 15,945
Likes Received: 18,544 in 8,710 posts
Joined: Apr 2015
Reputation: 212
Post: #4
RE: Wismec Sinuous P80 80W TC Box Mod (mod only)
That is my next mod - really nice looking gear. Next week maybe[Image: smile.gif]
12-09-2017 03:30 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like ecignut's post:
Fatboy (09-12-2017), Raymcconn (09-12-2017)
TinWhisker Online
The Salty Dog
*******
Senior Staff

Posts: 13,385
Likes Given: 17,717
Likes Received: 21,271 in 9,761 posts
Joined: Aug 2015
Reputation: 212
Post: #5
RE: Wismec Sinuous P80 80W TC Box Mod (mod only)
You and I get to pay for it. Ray gets his free! Man, some people.
12-09-2017 03:33 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like TinWhisker's post:
ecignut (09-12-2017), Raymcconn (09-12-2017)
Raymcconn Offline
Senior Member
****

Posts: 251
Likes Given: 356
Likes Received: 275 in 152 posts
Joined: Jan 2017
Reputation: 12
Post: #6
RE: Wismec Sinuous P80 80W TC Box Mod (mod only)
I am lucky my son bought a dagger, or Ray wouldn't get one at all. 
12-09-2017 03:42 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like Raymcconn's post:
ecignut (09-12-2017), TinWhisker (09-12-2017)
ecignut Online
Squonk and Toodle Club Member
*******
Senior Staff

Posts: 11,116
Likes Given: 15,945
Likes Received: 18,544 in 8,710 posts
Joined: Apr 2015
Reputation: 212
Post: #7
RE: Wismec Sinuous P80 80W TC Box Mod (mod only)
(12-09-2017 03:42 PM)Raymcconn Wrote:  I am lucky my son bought a dagger, or Ray wouldn't get one at all. 
Hi Ray - the Dagger is a nice mod as well - been looking at that one too[Image: smile.gif].
12-09-2017 03:51 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like ecignut's post:
Raymcconn (09-12-2017), TinWhisker (09-12-2017)
Raymcconn Offline
Senior Member
****

Posts: 251
Likes Given: 356
Likes Received: 275 in 152 posts
Joined: Jan 2017
Reputation: 12
Post: #8
RE: Wismec Sinuous P80 80W TC Box Mod (mod only)
(12-09-2017 03:51 PM)ecignut Wrote:  
(12-09-2017 03:42 PM)Raymcconn Wrote:  I am lucky my son bought a dagger, or Ray wouldn't get one at all. 
Hi Ray - the Dagger is a nice mod as well - been looking at that one too[Image: smile.gif].
It is a very nice mod, I got one a few months ago. The auto TC is a interesting feature. I haven't used it much since you need a tank or RDTA for it to work correctly.
12-09-2017 04:04 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like Raymcconn's post:
ecignut (09-12-2017), TinWhisker (09-12-2017)
52anddone Offline
Junior Member
**

Posts: 31
Likes Given: 87
Likes Received: 43 in 23 posts
Joined: Nov 2017
Reputation: 2
Post: #9
RE: Wismec Sinuous P80 80W TC Box Mod (mod only)
(12-09-2017 03:09 PM)Raymcconn Wrote:  Let’s get this out of the way. This Sinuous P80 was sent to me from Efun.top specifically for the purposes of this review. This will not in any way, cause me to give this mod a favorable review or influence my opinion in any way.
Quote:WISMEC Sinuous P80 80W TC Box Mod Features:


  1. Single High-Amp 18650 Batteries – Not Included
  2. Wattage Output Range: 1-80
  3. Minimum Atomizer Resistance: 0.05ohm
  4. Temperature Control Range: 200-600F
  5. Ni200, Titanium, and 316 Stainless Steel Compatibility
  6. TCR Adjustments
  7. 2 A quick charge
  8. Stealth Firing Bar – Squeeze to Fire
  9. LED Battery Light Indicator
  10. Intuitive 0.96 Inch OLED Display
  11. Slide-to-Open Hinged Battery Door
  12. Dual Circuit Protection
  13. Reverse Polarity Protection
  14. MicroUSB Port – Firmware Upgrades
  15. Centered 510 Connection – Fits up to 25mm


How it is packaged:
The box has two tiers. Top tier has the mod and the warning card, under that you will find your usb cable and the user manual. If you bought the kit you will also find your Elabo Mini tank also.


                                         [Image: dzsjnsg.jpg?6] 
                                                                                  
                                        [Image: hDGhNFw.jpg?2]


Quote:Description:


 The Wismec Sinuous P80 features a centered 510 pin, a side OLED screen, hidden firing bar and the usb port for charging or firmware upgrades.  The battery compartment at the bottom is a pull to open lid. Some other features it has are customizable LED light on each side. You have a choice of red, green or yellow.  It also has a pre heat function, and full temperature control with TCR adjustments. It also has a 2 A quick charge.  It has a power range of 1 to 80 watts, and tanks up to 25mm will fit with out over hang.


The Sinuous P80 comes in red, silver, black, blue and bronze.




Operation:


After installing the battery you press on the firing bar five times continually to turn on or off the mod. By pressing the fire button three times continually you enter the mode option menu. There you chose the operating mode of your choice. Including VW, Bypass and all your TC modes including TCR-M1.  


If you press the firing bar and the right regulatory button at the same time you enter the menu where you chose your LED light color or turn it off, turn on or off you logo option and adjust or turn off your pre heat. Pressing the fire bar and left regulatory at the same time turns on or off your stealth mode. Pressing both regulatory buttons locks or unlocks the keys.




A week of usage:


I will be honest. When I first saw the mod I thought there is no way that I would ever use something like this. I do not like huge mods but I thought this would be too small for my hands. I was surprised how it fit in my hand and was comfortable. My big fingers could press the regulatory buttons without a problem. Like any single battery mod I did have to carry a extra battery with me.




Now let’s look at how I used it.


I used my 22mm Tsunami with a duel 10 wrap 316L, 0.24 ohms @ 62W. It vaped fine but it ran through the battery pretty quick how I vape. I went through 2 new HG2’s at work. This is no different than any other single battery mod. So no surprises here.


                                    [Image: fzEO9MP.jpg?1]






 I then switched out to a tank running a 0.5 ohm coil @ 42 W. I had a battery last me all day at work switching to the second battery as I was leaving. I should add I turned off the LED lights and logo option. So again no surprises.


                                   [Image: 5FkbJC6.jpg?1]


Temp Control is not that great; the pre heat function does work. The firmware upgrade available is supposed to improve the TC. I haven’t noticed that much of a difference after installing it. You can find the firmware here.  http://www.wismec.com/software/wismec-tc-software-for-upgrading-sinuous-p80/


I also used this on bypass mode, not battery friendly but I did enjoy it on this mod.




Overall I like the Sinuous P80. The centered 510, firing bar and oversized OLED display (0.96”) made it easy to like. Another big plus for me is you have the option to run Artic Fox firmware on it if you choose to do so. I definitely have situations where a mod this size, light weight and pocket friendly will come in handy.  A few things I did not like was all my tanks didn’t sit flush on the mod, there was a mm space in between. The tanks were on tight and vaped fine. Also you can’t see the screen out side in the sun and can’t adjust how long the display is on for. It seems to be on for longer than it needs to be. None of the three is a deal breaker but I wanted to bring them up. I think I found my new mod for golf course !!!!








You can get the mod here:  https://www.efun.top/wismec-sinuous-p80-80w-tc-box-mod.html


You can get the kit here: https://www.efun.top/wismec-sinuous-p80-with-elabo-mini-tc-full-kit.html


Please let me know what you think. This being the first time doing this I am looking any and all feedback.
Hi Ray, I just finished reading your excellent review of the WisMec Sinuous P80 and loved it. I have been researching it for over a week now and your review sent me to purchase it.

A little background first. This is my first post here, I just joined, and have been reading a lot of posts on different WisMec devices. I'm coming from using a WisMec Presa 100TC since May of 2016, and Presa 75TC since Aug last year, without a fault in either. Added to that your review and what I had already found myself from "The Wide World of the Internet" on the Sinuous P80, I bought in. I should be getting it in a few days now.Yahoo

I'll be posting any problems/concerns I have, if any (I like my Presa's very much), in the proper place in this forum. I expect to be using it in Power mode exclusively, again like my Presa's. I only go TC in my G2's and Slice's with Kanthal/NiCr. I'm what might be called a TootleWomper kind of vaper.

Again, Thank You for a very detailed Review.Good

P.S. I have just downloaded AF, on your recommendation (and others), and am planning to install it on one of my Presa's to check out (I have 4 of them, (2) 100's and (2) 75's).
(This post was last modified: 12-11-2017 06:59 PM by 52anddone.)
12-11-2017 04:39 AM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like 52anddone's post:
Raymcconn (11-29-2017), TinWhisker (11-12-2017)
ecignut Online
Squonk and Toodle Club Member
*******
Senior Staff

Posts: 11,116
Likes Given: 15,945
Likes Received: 18,544 in 8,710 posts
Joined: Apr 2015
Reputation: 212
Post: #10
RE: Wismec Sinuous P80 80W TC Box Mod (mod only)
I now have 2 of these mods - good solid well built gear.
12-11-2017 11:49 AM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like ecignut's post:
52anddone (11-12-2017), Raymcconn (11-29-2017)
Post Reply