What did you get today?

[gords1001]

Honestly? I'm very very taken with it.

And its a proper hybrid, none of that 18350 genesis guff, its a pretty leak proof tank with a decent cell driving it, a good lock ring, adjustable throw, the switch just needed disassembling and reassembling and its great now.

[Don]

My brass Origin clone has a huge PITA locking ring. As in home use only. Most bottom firers lock mechanisms IMO are about as much fun as bleeding piles.

[gords1001]

Whats wrong with yours Don? Does it unscrew the whole switch when you try to use it?

I found I had to remove the delrin part and theres a knurled ring and the adjustable battery contact. Tighten up that knurled ring and then it doesn't disassemble itself when you turn it.

[Don]

My problem is that the fire button unscrews itself in normal use. Every third draw I have to screw it back in.

---

I must be turning it a bit with my little finger every time I fire it.

I can live with this but might put some nail varnish (V V weak thread lock) on the threads to stop this.

[gords1001]

It sounds like the knurled ring isn't tight. Have a look at that, mine was doing the same thing but its been fine since I ran that ring up tight, the throw adjustment even works now lol

[gords1001]

I got a warm fuzzy feeling today.

I was going visiting my mum, ergo ar kid too, so, I dug out and cleaned the nemesis, rsst and nimbus clone. Recoiled the rsst and nimbus using .45 kanthal, I love this stuff, it makes real durable sub ohm micro coils.....

Rsst is now, reduced chamber, 2mm airhole, .7ohm coil and cotton wick. Nice relatively sensible set up...

I was aiming to end up with the nimbus around .6ohm dual coil.....yeah ok. It ended up .4ohm....

Never mind, I've a couple of 1500mah efests good for 20amp, found a uk lead to suit my tr006 that was spare, a couple of magnets to use as spacers as it had always been sketchy with 18650 cells all works a treat.

I'd already given our phil a bag of cotton so we were set to go.

Now, he's been using an itaste vv with cheap clearomiser's, and being unemployed for a while, he's been cleaning the heads, he's got a year out of thosr heads but they gave up the ghost this week.

So he's stepped from a twelve watt maximum mod to twenty five to forty watt set ups in one fell swoop. He's pretty damned stoked considering he finds most of my gear intimidating, even plans to give the nimbus a good go despite prefering mouth to lung hits.

He's donated the itaste vv to see if toni takes to it better than some of my mods, its certainly more ladylike than the hammer for example.

I wish I'd taken a picture of the nemesis with the rsst on, it looked awesome, I should have played with it more because it vaped great too.

Anyway, phils chuffed to bits with his new gear, and with that thick wire, it shouldn't need anything other than fresh cotton every once in a while and a dry burn for a long time, its also conveniently hidden my nem and the origin/aqua has dropped in its place, maintaining mrs gords anger levels

[Pulsar]

Glad he liked it. I have tried a few times to get my uncle to try my ecigs, but he wants nothing to do with it... wont even give it a try. My fiance had tried a few times, and I got her a nice 510 cig a like when I first started and it got no use... she too wants nothing to do with it

[gords1001]

Toni is reluctant, I pointed out it would at least be nice if she used it in the day time when the kids are about, she agreed to that so we'll see.

Just need to get a davide and some tobacco juice of sone description

[Spasmod]

I wish I had a brother like you Graham

[gords1001]

Why? I'm a complete $#@t