Some interesting Alibaba mods [pic heavy]

[madecov]

I have done business with Elego, so I can get the one shown in the image. They are a good company. The E-Huge is manufactured by KSD, It is a giant VAMO, comes with an adapter so you can charge other devices off the 26650. There is a second tube available so you can run it on 2X 26650. Guess you could vape about a month on that.

[apt323]

(25-01-2014 02:24 AM)Pulsar Wrote:  VestureofBlood, MRsDNF, ChicagoX, Nitro

Thanks thats who they are! 

Maybe, just maybe!

[gords1001]

You'd have to get pretty funky with the internal chamber of the dripper, the mods going to be 30+ mm od.

I want a bottom coil 26650 hybrid with a 10ml tank.....

[Pulsar]

I want one like the gun the cop from Nice Dreams uses

[Spasmod]

Yes collectively we need to get Steve (MRsDNF) involved in the Vaping community because can you imagine the Mods he'd make ? Johnny and I were having that exact conversation yesterday.

[Pulsar]

Just a quick rough sketch. battery tube is 32mm*70mm, top cap tapers down to 22mm for use with most rebuildables. Top cap was not really measured out, and would need some significant thought put in for the switch mechanism and adjustable battery contact and atty contact posts.

I am thinking something like a 20mm derlin cylinder with a hole drilled out in the center for a brass tube to be press fit in. Have the inside of the brass tube threaded for the contact pins to screw into. Then machine out a hole in the side for the switch to contact the brass tube and a recess for a magnet to be glued in


edit: I had done 32mm tube so you have 28mm for the battery, and 2mm thick walls. then one mm of that would be used for an aggressive knurling

[gords1001]

I really want to machine at 26700 mod......60a continuous draw seems like a plan to me



Just make your coils with 1.5mm sq copper lol

[Pulsar]

If you plan ahead and make the battery tube and tail spring correct, you could do 26650 and 26700. Just need a good spring that would handle a Gord at 60a

Need to work on the top cap design a little. The straight taper from 32-22mm looks kind of off, but the taper down would be more practical than a straight up 32mm atty


Put a little more thought into the tailcap too..

      ____________________
     /                                    \
    l_________TVF_________l


Rough idea anyway

[gords1001]

I'd probably do the tail cap with magnets and a copper top hat plunger, then there is no spring and it doesn't need to be man enough to conduct 60 + amps.

I also agree you'd want the top cap to taper down to 22 or 23 mm so there's not a big daft step to the atty. If I was doing it (and I may honestly give this a go in the future) I would make the whole damned thing out of copper, my biggest issue is finding a good tap for the 510, although the other option is just to make a dripping hybrid, six coil, like an igo w4 but seven posts......not that I've given this any thought or anything.....

[Don]

I have a couple of big enough chunks of good-quality brass. If they can find a good home with someone who can machine them ...

Warning, they weigh about 10lbs so will cost a small fortune to post.

Maybe we need a BLF/TVF meet somewhere convenient...