Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Innokin iTaste 134
Author Message
JohnnyMac Offline
The Mac Daddy!
********
Administrators

Posts: 1,513
Likes Given: 1,217
Likes Received: 1,317 in 683 posts
Joined: Aug 2013
Reputation: 8
Post: #1
Innokin iTaste 134
Ok, am I crazy for wanting this bad boy?  Too much money for a mod?  It's actually a very good price as this mod sells elsewhere for $200 or more.

Innokin iTaste 134 for $107.26

[Image: 1486000-6.jpg] [Image: 1486000-1.jpg] 
[Image: 1486000-7.jpg] [Image: 1486000-8.jpg]
The 134 is a VW only mod and is adjusted by twisting the control ring in the center of the mod.

Details:
Tips: The iTaste 134 is a microprocessor-controlled VW mod that allows you easily adjust the wattage with a rotational wheel. The solid stainless steel body gives it a fairly hefty weight. With 510/eGo threading, and a removable beauty ring, this mod will compatible virtually any clearomizer, cartomizer or tank.
  • Power On/Off: press the firing button quickly 3 times
  • Adjusted with the rotational wheel to 6.5W, 7W, 8W, 9W, 10W, 11W, 12W, and 12.5W
  • Battery level indicator: (green = fully power; yellow = medium power; red = low power)
  • 10-Seconds cutoff
  • Short circuit protection
  • Reverse battery protection circuit
  • Low voltage warning
  • LED light blinking mode
  • Removable beauty ring
  • 510/eGo threading connector
  • Can be powerd by 18650 battery ( battery sold separately)
  • Comes with a iClear30 dual coil clearomizer(with rotatable drip tip)

I haven't read a bad review on it yet and I'm waiting for the black and stainless version to come out as I think that one is even sharper than the all SS version.  THe first time I saw the two tone version it blew my nips off!
11-10-2013 07:37 PM
Visit this user's website Find all posts by this user Like Post Quote this message in a reply
JohnnyMac Offline
The Mac Daddy!
********
Administrators

Posts: 1,513
Likes Given: 1,217
Likes Received: 1,317 in 683 posts
Joined: Aug 2013
Reputation: 8
Post: #2
RE: Innokin iTaste 134
Here is the black & silver version I'm waiting for...

[Image: itaste123.jpg]
11-10-2013 08:08 PM
Visit this user's website Find all posts by this user Like Post Quote this message in a reply
gords1001 Offline
Sir Gords - Slayer of Joose !
*****

Posts: 1,937
Likes Given: 500
Likes Received: 1,035 in 654 posts
Joined: Aug 2013
Reputation: 9
Post: #3
RE: Innokin iTaste 134
only 12w? is it worth putting a cell in it? lol

it looks awesome and would be a good edc set up with a gat light, my brothers itching for one of these but at $100 he can buy it his bloody self
11-10-2013 08:31 PM
Find all posts by this user Like Post Quote this message in a reply
JohnnyMac Offline
The Mac Daddy!
********
Administrators

Posts: 1,513
Likes Given: 1,217
Likes Received: 1,317 in 683 posts
Joined: Aug 2013
Reputation: 8
Post: #4
RE: Innokin iTaste 134
Dude, 12W is plenty for most people, myself included.  I don't run my SVD at more than 8W anyway.  More than that and the juice starts tasting burnt.  12 is more than enough.  I hear you like to run 11W through a CE4 and I can't imagine how shitty that must taste.  I tried my SVD at 11W in a dual coil and all I could taste was burnt juice.  Ewww! Tongue
11-10-2013 08:40 PM
Visit this user's website Find all posts by this user Like Post Quote this message in a reply
[-] The following 1 user Likes JohnnyMac's post:
tuftony352 (08-23-2015)
gords1001 Offline
Sir Gords - Slayer of Joose !
*****

Posts: 1,937
Likes Given: 500
Likes Received: 1,035 in 654 posts
Joined: Aug 2013
Reputation: 9
Post: #5
RE: Innokin iTaste 134
lol, I keep any of my ce4's well below 8watt for that very reason, the dream atomiser though? that bad boy happily runs at 15watts without the slightest sign of burning, possibly because I'm on 1.6ohm .2mm coils and bastow wick, I cant remember where I got that from but its damned good stuff, the base of the atomiser soon starts to feel like a 3.5a xm-l in a tube host though, I tend to keep it at about 11.5watts to be honest, depends on my mood.

I'm only pulling your leg, I just sent the link to our kid, let him pour over it, for now, I've not found the limits of my vamo's, they use any cell I have, give plenty of power to a coil, they just wont run below 1.2ohm, but then, you need a mech mod and a seriously good cell to be doing that and I cant honestly see the point myself.
11-10-2013 09:01 PM
Find all posts by this user Like Post Quote this message in a reply
madecov Offline
Senior Member
****

Posts: 499
Likes Given: 2
Likes Received: 311 in 196 posts
Joined: Sep 2013
Reputation: 4
Post: #6
RE: Innokin iTaste 134
E bay has them for about $140.00 average. Once I am established I may stock a few.  I do think I will have the Vamo in various colors.

[Image: 1379125800_10_1_USD_5_dark.png]
11-10-2013 11:00 PM
Find all posts by this user Like Post Quote this message in a reply
tangerinedream Offline
Junior Member
**

Posts: 1
Likes Given: 0
Likes Received: 0 in 0 posts
Joined: Mar 2015
Reputation: 0
Post: #7
RE: Innokin iTaste 134
Hi new person here. I have an itaste 134 mini. I have batteries. They work. I have juice. I also bought an atomizer head, but I can't figure out how to get the head in the tank, or even if that's what I'm supposed to do. The manual is utterly useless. Can someone help me or can you direct me to someone who can? 

Thanks, 
tangerinedream
12-03-2015 02:11 AM
Find all posts by this user Like Post Quote this message in a reply
bcfos Offline
Junior Member
**

Posts: 45
Likes Given: 9
Likes Received: 36 in 22 posts
Joined: Mar 2015
Reputation: 0
Post: #8
RE: Innokin iTaste 134
(12-03-2015 02:11 AM)tangerinedream Wrote:  Hi new person here. I have an itaste 134 mini. I have batteries. They work. I have juice. I also bought an atomizer head, but I can't figure out how to get the head in the tank, or even if that's what I'm supposed to do. The manual is utterly useless. Can someone help me or can you direct me to someone who can? 

Thanks, 
tangerinedream

If it is the swivel tip atomizer just unscrew the top of the tip (the swivel part) and it comes off to fill it with juice. If you bought a Clero atomizer you will need an adapter since the 134 body is threaded for a 510 atomizer (like a Kanger Protank or Aspier Natulus). 

Hope this helps
03-04-2015 11:09 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like bcfos's post:
JohnnyMac (04-04-2015), tuftony352 (08-23-2015)
Michael Offline
TVF Veteran
*****

Posts: 6,756
Likes Given: 17,354
Likes Received: 7,431 in 3,869 posts
Joined: Sep 2014
Reputation: 60
Post: #9
RE: Innokin iTaste 134
It's funny to look back at these old threads, where 12W was a lot of power and 8W was fine for a lot of people. Now we look at a 20W mod as nothing at all, and the big popular thing is the 100W or higher box mods. It's crazy how times change. 
04-04-2015 02:42 AM
Visit this user's website Find all posts by this user Like Post Quote this message in a reply
[-] The following 2 users Like Michael's post:
JohnnyMac (04-04-2015), tuftony352 (08-23-2015)
bcfos Offline
Junior Member
**

Posts: 45
Likes Given: 9
Likes Received: 36 in 22 posts
Joined: Mar 2015
Reputation: 0
Post: #10
RE: Innokin iTaste 134
(04-04-2015 02:42 AM)Michael Wrote:  It's funny to look back at these old threads, where 12W was a lot of power and 8W was fine for a lot of people. Now we look at a 20W mod as nothing at all, and the big popular thing is the 100W or higher box mods. It's crazy how times change. 

And 350 watts with the new Vicious Ant Variant.. And I thought 180 watts was a "warm" vape.. 350 would be like hell opened it's gates in my lungs..
04-04-2015 02:51 AM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 1 user Likes bcfos's post:
Michael (04-04-2015)
Post Reply