Anarchist Mod! (help?)

[MikeB624]

Hey! So I bought an Anarchist mechanical mod clone today. It was on sale and cheap and I loved the way it hit, feels and looks. Got it home, put on my Darkhorse RDA and it sits WAAYYYY to high. Id say theres a 1/4 inch gap between the RDA and the mod. I've been looking into videos on youtube and everyone says it has a floating self adjusting 510 connection...but my connection doesn't move. Any help out there for some advice? 

[Spasmod]

Hi Mike, it sounds like the floating pin is stuck.. can be a common issue. Do a little research and be sure it is a floating pin beforehand but if you're 100% certain then you may need to give it a gentle tap to get it moving.

You'll need to support the back of the top cap which holds the 510 floating pin then using something with a flat base approx the same width as the 510 pin tap gently until it comes free of the topcap, being very careful not to damage the 510 threads while you're at it.

Once the pin is removed, gently sand the pin with some very fine sand or glasspaper until it is a snug fit but will move with a little pressure. I had to do the same with my Panzer clone when it arrived.

If you're not comfortable doing it yourself, take the mod to your local B&M and I'm sure they'll be willing to take a look for you.

I hope that helps 

[JohnnyMac]

Perfect advice from Spas. Couldn't have said it better myself and he saved me a bunch of typing.

Let us know how it goes for you.

[Spasmod]

LOL

[Michael]

Johnny I skimmed that when I first read it so I thought you said "I couldn't have said it better myself without typing" lol