Advice 80W boxer, how to use?

[gentlydoingit*]

It's leaking or your just using it up quickly?

If it's leaking.. is the top fill hole closed? Have you burned out the coil? is there a juice control built in you can close down?  Disasemble it and take a pic if you can, there might be another o ring missing or you've assembled it wrongly


*another random smiley I can't rid 

[WWEFANS]

It's leaking from the button, from the airflow slot.  Really confusing, will get some more pics tomorrow, during the day time.
Thanks for your time and kind help.

[WWEFANS]

Picture coming:

[gentlydoingit*]

OK, reading between the lines I think I can see what's happening..

Pic 1. The juice fill hole is in the open position, marked with a tear drop icon. When the tank is full rotate that section round so the arrow points to the vapour icon.
Pic 2. This is where I think you've gone wrong.. squeeze the juice down either of the outer holes, don't put any down the middle one. Once the tank is full rotate the top to close the hole.
Pic 3&4. Tighten down the coil before you screw it to the mod.
All the o rings look to be in place.

[WWEFANS]

Yes, I squeezed the juice down in the side hole, no middle hole.    And I roated it to clould icon.   
The only difference is that I did not fill the tank full, only 1/3.

[gentlydoingit*]

Ahh, the coil also looks to have flow control. If your juice is thin it's possible it can leak. Rotate the outer part of the coil head to close down the hole a little

[WWEFANS]

Another pic,the wire looks weird. Maybe the leak began from here?

[gentlydoingit*]

Possibly,  but doubtful. Easy way to find out is to bend it flat against the ribbed section and try again.

[WWEFANS]

Closed the holes 3/4, still leaking.   

[WWEFANS]

It's really killing me.