Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ATOPACK DOLPHIN, A written review
Author Message
Raymcconn Offline
Senior Member

Posts: 251
Likes Given: 356
Likes Received: 276 in 153 posts
Joined: Jan 2017
Reputation: 12
Post: #1
ATOPACK DOLPHIN, A written review
This ATOPACK DOLPHIN was sent to me from Joyetech specifically for the purposes of this review. This will not in any way, cause me to give this mod a favorable review or influence my opinion in any way.


•6 ml cartridge, 2 ml also available
•2100mAh on board battery
•50 W maximum output
•Dimensions: 100 x 50 x 31mm
•92 g weight
•Transparent juice tank
•Available in yellow, blue, white, black and orange
•2 A charge
•LED battery life indicators
•Cartridge side fill without removal of coil head
•JVIC vertical juice injection system
•MTL and DL coils included

Kit Contents:

1 x Atopack Dolphin Battery
1 x Atopack Dolphin Cartridge
1 x Atopack JVIC3 1.2ohm Coil
1 x Atopack JVIC2 0.25ohm Coil
1 x QC USB cable
1 x Manual
1 x Warranty card
1 x Warning card
Spare parts

How it is packaged:

It comes in a drawer type box that has two tiers. Top tier has the mod with cartridge installed. The bottom you will find the USB cable, user manual, warranty card, two coils (0.25 and 1.2) and a spare mouth piece.

[Image: U2iEwu3.jpg?2] [Image: 3mesvGr.jpg?3]


The Joyetech Atopack Dolphin is a AIO compact pod style vaping kit. It has a built-in 2100mAh battery and optional 6ml/ 2ml cartridges. You can check the e-juice level through its transparent cartridge and battery level is displayed with its five-level indicator lights. It uses the JVIC system ceramic coils and has an oversized firing button. It also has a fast charge that allows you to charge the battery in about 30 min.

ATOPACK DOLPHIN comes in yellow, blue, white, black and orange


To turn on or off you click on firing button 5 times.

[Image: DxAP9Cm.jpg?2]

How to Fill:

• Separate the mouthpiece from the battery by pulling the parts in opposite directions

• Locate the little silicon tab

• Open it

• Fill to capacity

[Image: 4I4f3op.jpg?4]

How to Change the Coils:

• Separate the mouthpiece from the battery

• Remove the coil head from its silicon seating

• Replace

[Image: mv6LTs2.jpg?1]

After using:

This is actually a good device. It’s extremely portable, lightweight, holds a good amount of e juice, is easy to fill, and charges quickly. The air flow is restricted and when you use the mouth piece it will restrict it more. You get good flavor and decent vapor production. Definitely great for on the go vaping, If you are a beginner all you have to do is set it up and not worry about anything. I love using this when doing yard work in the cold environment. I could pull it out of the jacket pocket and it didn’t stick to my hands or mouth. If you are a MTL or a DL vaper this device was made with each in mind. IMO it is a nice set up that has many different uses from the beginning vaper to the experienced vaper traveling.
Now the few cons I had. I had trouble getting the cartridge / pod off the unit. It is very smooth and very hard to grab. I found myself using my nails to go around the cartridge until it was loose enough to pull off. The other thing is for MTL vapers. While I think the air flow is restrictive enough with the mouth piece on I am not sold on it will be for everyone. This is something common on these types of devices I have found. Maybe include a “cap or “plug” so you can close off one side of the air flow slots. It still seems to work if I used my finger to cover one side.

You can buy the Atopack Dolphin here:

Thanks For Reading
01-12-2017 04:57 PM
Find all posts by this user Like Post Quote this message in a reply
[-] The following 1 user Likes Raymcconn's post:
Don (12-01-2017)
Post Reply